Anna university results

Monday, 1 June 2015

INTELLIGENT NETWORK Architecture

INTELLIGENT NETWORK
5.1       Overview of Intelligent Network Architecture
Over the last thirty years, one of the major changes in the implementation of Public Switched Telephone Networks (PSTNs) has been the migration from analogue to digital switches. Coupled with this change has been the growth of intelligence in the switching nodes. From a customer's and network provider's point of view this has meant that new features could be offered and used.
Since the feature handling functionality was resident in the switches, the way in which new features were introduced into the network was by introducing changes in all the switches. This was time consuming and fraught with risk of malfunction because of proprietary feature handling in the individual switches.
To overcome these constraints the Intelligent Network architecture was evolved both as a network and service architecture.
In the IN architecture, the service logic and service control functions are taken out of the individual switches and centralized in a special purpose computer. The interface between the switches and the central computer is standardised. The switches utilize the services of the specialized computer whenever a call involving a service feature is to be handled. The call is switched according to the advice received by the requesting switch from the computer. For normal call handling, the switches do not have to communicate with the central computer.
5.2       Objectives of the Intelligent Network
The main objectives of the IN are the introduction and modification of new services in a manner which leads to substantial reduction in lead times and hence development costs, and to introduce more complex network functions.
An objective of IN is also to allow the inclusion of the additional capabilities and flexibility to facilitate the provisioning of services independent of the underlying network's details. Service independence allows the service providers to define their own services independent of the basic call handling implementation of the network owner.
The key needs that are driving the implementation of IN are :
                  *    Rapid Service Deployment
Most business today require faster response from their suppliers, including telecommunication operators. By separating the service logic from the underlying switch call processing software, IN enables operator to provide new services much more rapidly.
            *    Reduced Deployment Risk
Prior to IN, the risk associated with the deployment of new services was substantial. Major investments had to be made in developing the software for the services and then deploying them in all of the switches.
With the service creation environment available, the IN services can be prototyped, tested and accessed by multiple switches simultaneously. The validated services can then be rolled out to other networks as well.
            *    Cost Reduction
Because the IN services are designed from the beginning to be reusable, many new services can be implemented by building on or modifying an existing service. Reusability reduces the overall cost of developing services. Also, IN is an architecture independent concept, i.e. it allows a network operator to choose suitable development hardware without having to redevelop a service in the event that the network configuration changes.
            *    Customization
Prior to IN, due to complexity of switch based feature handling software, the considerable time frame required for service development prevented the provider from easily going back to redefine the service after the customer started to use it. With IN, the process of modifying the service or customization of service for a specific customer is much less expensive and time consuming.
The customization of services is further facilitated by the integration of advanced peripherals in the IN through standard interfaces. Facilities such as voice response system, customized announcements and text to speech converters lead to better call completion rate and user-friendliness of the services.
5.3       IN Architecture
Building upon the discussion in the previous section, one can envisage that an IN would consist of the following nodes :
·         Specialized computer system for – holding service logic, feature control, service creation, customer data, and service management.
·         Switching nodes for basic call handling.
·         Specialized resources node.
The physical realization of the various nodes and the functions inherent in them is flexible. This accrues form the "open" nature of IN interfaces.
Let us now look at the nodes that are actually to be found in an IN implementation.
The service logic is concentrated in a central node called the Service Control Point (SCP).
The switch with basic call handling capability and modified call processing model for querying the SCP is referred to as the Service Switching Point (SSP).
Intelligent Peripheral (IP) is also a central node and contains specialized resources required for IN service call handling. It connects the requested resource towards a SSP upon the advice of the SCP.
Service Management Point (SMP) is the management node which manages services logic, customers data and traffic and billing data. The concept of SMP was introduced in order to prevent possible SCP malfunction due to on-the-fly service logic or customer data modification. These are first validated at the SMP and then updated at the SCP during lean traffic hours. The user interface to the SCP is thus via the SMP.
All the nodes communicate via standard interfaces at which protocols have been defined by international standardization bodies. The distributed functional architecture, which is evident from the above discussion, and the underlying physical entities are best described in terms of layers or planes. The following sections are dedicated to the discussion of the physical and functional planes.
5.3.1    Physical Plane
 Service Switching Point (SSP)
The SSP serves as an access point for IN services. All IN services calls must first be routed through the PSTN to the "nearest" SSP. The SSP identifies the incoming call as an IN service call by analysing the initial digits (comprising the "Service Key") dialled by the calling subscriber and launches a Transaction Capabilities Application Part (TCAP) query to the SCP after suspending further call processing. When a TCAP response is obtained from the SCP containing advice for further call processing, SSP resumes call processing.
The interface between the SCP and the SSP is G.703 digital trunk. The MTR, SCCP, TCAP and INAP protocols of the CCS7 protocol stack are defined in this interface.
 Service Control Point (SCP)
The SCP is a fault-tolerant online computer system. It communicates with the SSPs and the IP for providing guidelines on handling IN service calls. The physical interface to the SSPs is G.703 digital trunk. It communicates with the IP via the requesting SSP for connecting specialized resources.
SCP stores large amounts of data concerning the network, service logic, and the IN customers. For this, secondary storage and I/O devices are supported.

As has been commented before, the service programs and the data at the SCP are updated from the SMP.
 Service Management Point (SMP)
The SMP, which is a computer system, is the front-end to the SCP and provides the user interface. It is sometimes referred to as the Service Management System (SMS). It updates the SCP with new data and programs (service logic) and collects statistics from it. The SMP also enables the service subscriber to control his own service parameters via a remote terminal connected through dial-up connection or X.25 PSPDN. This modification is filtered or validated by the network operator before replicating it on the SCP.
The SMP may contain the service creation environment as well. In that case the new services are created and validated first on the SMP before downloading to the SCP.
One SMP may be used to manage more than one SCPs.
 Intelligent Peripheral (IP)
The IP provides enhanced services to all the SSPs in an IN under the control of the SCP. It is centralized since it is more economical for several users to share the specialized resources available in the IP which may be too expensive to replicate in all the SSPs. The following are examples of resources that may be provided by an IP:
·                     Voice response system
·                     Announcements
·                     Voice mail boxes
·                     Speech recognition system
·                     Text-to-speech converters
The IP is switch based or is a specialized computer. It interfaces to the SSPs via ISDN Primary Rate Interface or G.703 interface at which ISUP, INAP, TCAP, SCCP and MTP protocols of the CCS7 protocol stack are defined.
The IN architecture is depicted in Fig.1


 Fig 1 IN Architecture

 


5.3.2      Distributed Functional Plane
Functional model of IN contains nine functional entities (FE's) which are distributed over various physical entities (PE's) described in the previous section. A functional entity is a set of unique functions. Brief description of the FE's is given below :
 CCAF
Call Control Agent Function, gives users access to the network.
 CCF
Call Control Function provides the basic facility for connecting the transport (e.g. speech). It involves the basic switching function and trigger function for handling the criteria relating to the use of IN.
 SSF
Service Switching Function is used to switch calls based on the advice of the SCF at the SCP. This function provides a service independent interface.
 SCF
It contains the service logic components and advises the SSF at SSP on further call handling.
 SDF
Service Data Function contains the user related data and data internal to the network.
             SRF
Specialized Resources Function covers all types of specialized resources other than the connection resources that are in the exchange (e.g. recorded announcements, tones, conference bridges, etc.).
 SCEF
Service Creation Environment Function specifies, develops, tests and deploys the services on the network.
 SMAF
Service Management Access Function provides an interface between service management function and the service manager who may be an operator.
SMF
Service Management Function enables a service to be deployed and used on IN. Fig. 2 depicts the distribution and interconnection of the various functional entities.

 Fig. 2 Distributed Functional Entities
The distribution of functional entities over the physical entities and their inter-connection is summarized in Table 1 and 2 below. It may be noted that all the physical entities may not be present in all INs as the choice of functional entities to be provisioned is entirely up to the service provider.
Table 1
Distribution of FE's over PE's
Physical Entity
Possible Functional Entities
SSP
CCF, SSF, CCAF
SCP
SCF, SDF
SMP
SCEF, SMF, SMAF
IP
SRF

Table 2
FE-FE Relationship to PE-PE Relationship
FE-FE
PE-PE
Protocol
SSF-SCF
SSP-SCP
INAP, TCAP, SCCP and MTP
SCF-SDF
SCP-SDP
X.25 or Proprietary
SCF-SRF
SCP-IP
SCP-SSP-IP
INAP, TCAP, SCCP and MTP
ISUP, INAP, TCAP, SCCP and MTP
SRF-SSF
SSP-IP
ISUP and MTP

5.4     IN  Services

The IN services proposed to be introduced in Indian network have been derived from ITU-T recommendations. Q.1211 (April ’92). This document briefly gives the description of 25 services mentioned in Capability set no. 1 (CS1) of above mentioned ITU-T recommendations. CS1 basically deals with single ended services (which ITU-T calls as Type-A services). Single needed services apply to only one party in the call.
      1 ABD – Abbreviated dialing
The subscriber can register a short dialing code and use the same for access to any PSTN Number.
2        ACC – Account Card Calling
·                     A special telephone instrument is required.
·                     User dials an access code and gets acceptance tone.
·                     Then he dials a PIN (personal identification no.) code and dials the called no. The Exchange reads the account number from card.
·                     The Billing is debited to an account number (Telephone no.) as defined by the card.
·                     In another variation of the service, the account number can be given through DTMF telephone instrument.
·                     The follow-on feature facilitates the subscriber to dial another number without disconnecting the call and without need to dial PIN and account number again.
3        AAB – Automatic Alternative Billing
·                     Call can be initiated by any user and any instrument.
·                     The call charges are billed in user’s account and that account need not be a calling or a called party.
·                     The user first dials access code.
·                     Receives an announcement to dial account code and PIN(which is given by management).
·                     The account code and PIN are validated to check its correctness and expired credit limit.
·                     On getting acceptance tone the user dials the called number.
·                     In another variation of the service, the called party may be billed based on his concurrence.
4        CD – Call Distribution
§  This service allows subscribers to have I/C calls routed to different destinations according to allocation law specified by management (The Subscriber has multiple installations).
§  Three types of laws exist :
§  Uniform load distribution
§  % Load distribution
§  Priority list distribution
§  In case of congestion or fault the alternative over flow is specified.
5        CFU – Call Forwarding Unconditional
The subscriber can forward all incoming calls to a specified destination number. Optionally an alerting ring/reminder ring can be given to the forwarding subscriber whenever there is an incoming call.
6        CRD – Call Rerouting Distribution
·   Calls are rerouted as per conditions encountered, e.g. busy or no reply (time specified) or overload or call limiter.
·   Then as per selected condition the call is rerouted to predefined choice, e.g. paper, vocal box, announcement or queue.
                                                              i.      Completion of calls to busy subscriber
The service cannot be fully implemented with CSI capability since the status of called party need to be known.

·         The calls are completed when subscriber who is busy becomes free.
·         On getting busy tone – user dials a code.
·         The user disconnects.
·         On called party becoming free, call is made by the exchange first to originating then to terminating subscriber (without any call attempt by the user).
                                                                  ii.CON – Conference Calling
The service cannot be fully implemented with CSI capability. In adding or dropping the parties concerned it is not possible to check the authenticity of the parties. This service requires a special transmission bridge to allow conversation among multiple subscribers.

CON-Add-ON-Conference Calling
·         User reserves the CON resources in advance indicating date, time of conference and duration.
·         Controlled by user.
·         In active phase of conference parties can be added, deleted, isolated again reattached or split the group of parties.
CON-Meet-ME – Conference calling meet me
·         User reserve the resource same as 8A.
·         Each participant dials a special number at specific time (specified at the time of booking of conference) and reach the conference bridge.
                                                                iii.CCC – Credit Card Calling
·                     The Credit Card Calling service allows subscribers to place calls from any normal access interface to any destination number and have the cost of these calls charged to account specified by the CCC number.
·                     A special instrument is not required. The caller has to dial card number and PIN using DTMF instrument.
·                     Follow-on feature may be provided optionally.
                                                          iv.      DCR – Destination Call Routing
The call is routed to destination pertaining to following conditions :
·                     Time of day, day of week
·                     Area of call originating
·                     Calling identity of customer
·                     Services attributes (non payment charges against subscriber)
·                     Priority
·                     Charge rates applicable for destination
·                     Proportional routing of traffic
·                     Optionally the subscribers can be provided with traffic details
                                                            v.      FMD – Follow me Diversion
·                     A subscriber can remotely control the call forwarding capabilities.
·                     It can be done from any point in the network using a password.
·                     It is required if subscriber moves from place to place in a day.
·                     The service subscriber will pay for diverted portion of the call.
                                                          vi.      FPH – Free Phone
·                     The called subscriber is charged for active phase of a call.
·                     For the calling user, no charging is done.
·                     The called subscriber can have multiple destinations and have DCR facility.
                                                        vii.      MCI – Malicious Call Indication
·                     The subscriber requests the Administration to register his number for MCI.
·                     Administration registers the subscriber for MCI.
·                     The called subscriber (who has registered this service) invokes the service during the active phase of the call if he feels that the call is malicious.
·                     The call is logged in the network with calling and called party number and Date and time of invoking the service.
·                     Optionally, the network can log unanswered calls also.
·                     Optionally, the facility to HOLD the connection may be provided.
                                                         viii.   MAS – Mass Calling
·                     It involves high volume of traffic.
·                     Calls can be routed to one or multiple destinations depending on geographical location or time of day.
·                     Mainly used in Televoting.
·                     The network operator allots a service number.
·                     The user dials this number to register his vote.
·                     The user is played an announcement and asked to give his choice.
·                     At the end of the service, the network operator provides the call details and the count on various preferences.
·                     After the service the same number can be reallocated to another subscriber.
·                     Calls made to this MAS number may be charged differently.
                                                                ix.OCS – Originating Call Screening
·                     This helps subscriber to screen outgoing call as per day and time.
·                     The screening list may be managed by subscriber.
·                     The restriction of screening list may be override by PIN or password. Three call cases are possible :
-                      Call screened and allowed
-                      Call screened and rejected
-                      Call passed by using override option
                                                                  x.PRM – Premium Rate
·                     The local call is charged at a higher (premium) rate.
·                     This service is used by service providers for value added information services, e.g. jobs, fortune, forecast, etc.
·                     The revenue is shared between network operator and service provider.
·                     The network operator allots a specific number to service provider, which can be reached from any point in the network.
·                     The provision exists for multiple site provider, in order to achieve minimum expenditure on actual call.
                                                                xi.SEC – Security Screening
·                     This capability allows security screening to be performed in the network before an end user gains access to subscriber’s network, systems or application.
·                     It detects the invalid access attempts : how many, over what time period, by whom and from where.
·                     It provides an added layer of security.
                                                              xii.SCF – Selected Call Forwarding (Busy/Don’t answer)
·                     This facility is used for a group of 5 to 10 subscribers.
·                     A list of SCF is prepared by a subscriber.
·                     The list contains the choices as per conditions and calling subscribers  of the group.
·                     A call from outside the group is forwarded to default telephone number.
·                     The variation in SCF list can be done as per time of the day.
                                                            xiii.SPL – Split Charging
·                     It allows service subscriber to share the call charges with calling party on per call basis.
                                                            xiv.SOT - Televoting
·                     It is used to survey the public opinion by different agencies.
·                     The network operator allocates a single telephone number to surveyor.
·                     Each time user makes a call he can get access to televoting.
·                     An announcement asks him to input further choice digits as per preference.
·                     As the user presses the digits the choice counter is incremented.
·                     After voting is ceased the service subscriber is supplied the results.
                                                              xv.TCS – Terminating Call Screening
·                     The incoming calls are screened as per screening list.
·                     Calls are allowed as per list and time of the day.
                                                            xvi.UAN – Universal Access Number
·                     National number is published by the subscriber.
·                     The subscriber may specify the incoming calls to be routed to number of different destinations based on geographical locations of caller.
                                                          xvii.UPT – Universal Personal Telecommunications
·                     A universal number is defined.
·                     Whenever subscriber changes the destination, he inputs that number from telephone.
·                     When a call comes, UPT number is translated to actual number.
·                     This number can be accessed across various multiple networks, e.g. mobile and fixed.
·                     It can be accessed from any user network access.
                                                        xviii.UDR – User Defined Routing
·                     The user is allowed to define the routing of outgoing calls through different network such as private, public, virtual or mixed network.
·                     As per time of the day, for example the call is routed to either public or private network whichever is cheaper.
·                     For example, outstation calls can have different routes at different times of the day.
                                                            xix.VPN – Virtual Private Network
·                     A private network is built using public network resources.
·                     A virtual PABX is created using different switches.
·                     A PNP (private numbering plan) can be incorporated on those numbers.
·                     Facilities such as CT, CH, dialed restrictions and other supplementary services can be provided within the network.
·                     Each line or user is assigned a class of service and specific rights in the network.
·                     To access the VPN from outside by one of VPN user, he is required to dial a password.
·                     Screening feature can be used to put restriction on outgoing and incoming calls.
·                     Call charges are assigned to VPN service subscriber.
·                     Additional Account Codes are assigned to service subscriber to analyse the costline wise.

5.     Charging
The IN services can be broadly divided into three categories for charging purposes :
-        No charging for calling user
-        Charging of calling user as per local call
-        Charging of calling user at higher rates

5.1    No charging for calling user : FPH, VCC and VPN services fall under this category. Level ‘160’ is free at present and is proposed to be allotted to such services. Local exchanges need to analyse only ‘160’ and route the call to SSP. This level has to be created as charge free. New services of this type can be introduced in future without any requirement of further modification in local exchanges.

5.2       Charging of calling user as per local call :UN (local) falls under this category. Level ‘190’ is free at present and is proposed to be allotted to such services. Local exchanges need to analyse only ‘190’ and route the call to SSP. This level has to be created as local charge. New services of this type can be introduced in future without any requirement of further modification in local exchanges.

5.3                 Charging of calling user at higher rates : PRM and UN (long distance) falls under this category. Since the charging is at higher rate it is proposed that prefix ‘0’ may be used to have barring facility. Level ‘090’ may be used for such purpose. Local exchange will analyse ‘090’ and route the call to SSP. This level has to be created as ‘charge on junction pulses’. New services of this type can be introduced in future without any requirement of further modification in local exchanges.


The access code of various IN services as proposed is as follows :

No charging for calling user :
FPH                                          1600
VCC                                         1601
Password change for VCC       1602
VPN                                         1603

Charging of calling user as per local call :
UN (local)                                 1901
Televoting                                 1902

Charging of calling user at higher rates :
PRM                                         0900
UN (Long distance)                 0901

CDOT IN System

First system(SCP) was deployed at Kolkata in December 1998 and subsequently at Bangalore, Ahemedabad and Lucknow. The capacity of CDOT-IN system is 1 Lakh BHCA and 10 Lakh VCC data. Number of CDoT SSP (MBM or SBM) is 200 nos. The services supported are

·      Virtual Card Calling VCC(ITC).

·      Account Card Calling ACC.

·      Free Phone Service FPH.

·      Premium Rate Number PRM.

·      Virtual Private Network VPN.

·      Televoting VOT.



Present traffic status in CDoT IN systems


SCP(C-DOT)
BHCA
IT card data
Kolkata
1.25 lakh
0.89 Million
Bangalore
1.2 Lakh
0.95 Million
Lucknow
1.15 Lakh
0.76 Million
Ahmedabad
0.85 Lakh
0.83 Million

Limitations of CDoT IN System


Following are the limitations of CDOT-IN systems:

·              Low and fixed SCP and SSP BHCA capacity.

·              Non-upgradable and scalable.

·              Low VCC Data capacity.

·              Limited resources for Announcement, DTMF, etc.

·              SSP functionality of switches not utilised.

·              Network based charging.

·              Additional services not available.

·              Limited Charging categories.

Alcatel IN System

The salient features of Alcatel IN systems are:

·        SCP capacity of 4 Lakhs BHCA which can grow upto 12 Lakhs BHCA.

·        50 Lakhs VCC Data storage capacity.

·        Integrated solution utilising the SSP capabilities of large capacity digital switches.

·        More features on IN services and management options.

·        SCP based charging.

·        Can be upgraded in terms of capacity and additional IN services.

·        Separate IP for independent resource management.

Types of IN Platform procured by BSNL from M/s. Alcatel

·        General Purpose IN Platform (GPIN).

SCP located at Kolkata, Lucknow, Ahmedabad and Bangalore catering to East, North, West and South zone Circles respectively.

·        Mass Calling IN Platform (MCIN).

SCP located at Hyderabad catering to Whole of India.


IN Services provided by Alcatel IN Platform

The services provided by Alcatel IN Platform are:

·            Account Card Calling (ACC).

·            Free Phone (FPH).

·            Universal Access Number (UAN).

·            Virtual Private Number (VPN).

·            Televoting (VOT).

·            Premium Rate (PRM).

·            Virtual Card Calling (VCC).

·            Universal Personal Number (UPN). - NEW

·            Number Portability (NP). – NEW

Virtual Card Calling (VCC)

·            This service is similar to the ACC. Here subscriber has to dial 16-digit card number to place a valid call.

·             Cards of fixed amount will be sold. The card number will be invalid after expiry of the amount or validation period. This account cannot be renewed.

·             No detailed bill will be provided to the subscriber.



Call Placement using VCC card

·         Dial 1602 345.

·         You will be prompted to dial your card number.

·         You will be prompted the balance amount in the account followed by request to dial the destination number.

·         A VCC Call: 1602 345<A><10 digit card No.> <A><Destination No.>

VCC Features


The features of VCC are as follows:

  • Multiple Language Choices- New
  • Profile Concept
  • Credit Limit- New
    • Minimum Credit to use the service
    • Minimum credit to make a call
    • Real Time Credit Supervision
    • Warning Tone- New
  • Follow On Calls
    • Called Party On Hook
    • Called Party No Reply
    • Called Party Busy
·                     Black List- New
·                     Predefined Promotional Number- New
·                     National/International Call Restriction
·                     Call log
·                     Payphone restrictions- New
·                     16 digit secret number will be used

Free Phone (FPH) Service

·              Here the concept of reverse charging is applied with additional features.

·              The service subscriber will have one logical number against more than one PSTN no. distributed all over the network.

·              He can have his own routing plan using Time Dependent Routing, Origin Dependent Routing facilities.

FPH Access

In other words, this service allows users to make calls to a free phone number    for which the called party has agreed to pay for the complete cost of the call.

§Access code: 1600 345

§Free phone number: XXXX (4 digits)

§Access can be from any Telephone and it will not be charged.

§  Dial 1600 345 XXXX





SAC and SK for services at Kolkata

 

Sl. No.
Service Name
SAC
SK
Sl. No.
Service Name
SAC
SK
1
VCC
1602345
1
7
UAN (MGMT)
1903345
5
2
ACC
1604345
2
8
UPN
0902345
6
3
FPH
1600345
3
9
UPN (MGMT)
1607345
6
4
PRM
0900345
4
10
VPN
1601345
9
5
UAN (LOCAL)
1901345
5
11
VOT
1902424 (Local charge)
7
6
UAN (LONG DISTANCE)
0901345
5
12
VOT
1603424 (no charge)
7

 



GSM ARCHITECTURE

                              GSM  ARCHITECTURE
 



INTRODUCTION


A GSM system is basically designed as a combination of three major subsystems: the network subsystem, the radio subsystem, and the operation support subsystem. In order to ensure that network operators will have several sources of cellular infrastructure equipment, GSM decided to specify not only the air interface, but also the main interfaces that identify different parts. There are three dominant interfaces, namely, an interface between MSC and the base Transceiver Station (BTS), and an Um interface between the BTS and MS.

GSM NETWORK STRUCTURE


Every telephone network needs a well-designed structure in order to route incoming called to the correct exchange and finally to the called subscriber. In a mobile network, this structure is of great importance because of the mobility of all its subscribers [1-4]. In the GSM system, the network is divided into the following partitioned areas.

·         GSM service area;
·         PLMN service area;
·         MSC service area;
·         Location area;
·         Cells.

The GSM service is the total area served by the combination of all member countries where a mobile can be serviced. The next level is the PLMN service area. There can be several within a country, based on its size. The links between a GSM/PLMN network and other PSTN, ISDN, or PLMN network will be on the level of international or national transit exchange. All incoming calls for a GSM/PLMN network will be routed to a gateway MSC. A gateway MSC works as an incoming transit exchange for the GSM/PLMN. In a GSM/PLMN network, all mobile-terminated calls will be routed to a gateway MSC. Call connections between PLMNs, or to fixed networks, must be routed through certain designated MSCs called a gateway MSC. The gateway MSC contains the interworking functions to make these connections. They also route incoming calls to the proper MSC within the network. The next level of division is the MSC/VLR service area. In one PLMN there can be several MSC/VLR service area. MSC/VLR is a role controller of calls within its jurisdiction. In order to route a call to a mobile subscriber, the path through  links to the MSC in the MSC area where the subscriber is currently located. The mobile location can be uniquely identified since the MS is registered in a VLR, which is generally associated with an MSC.
           
             The next division level is that of the LA’s within a MSC/VLR combination. There are several LA’s within one MSc/VLR combination. A LA is a part of the MSC/VLR service area in which a MS may move freely without updating location information to the MSC/VLR exchange that control the LA. Within a LA a paging message is broadcast in order to find the called mobile subscriber. The LA can be identified by the system using the Location Area Identity (LAI). The LA is used by the GSM system to search for a subscriber in a active state.

            Lastly, a LA is divided into many cells. A cell is an identity served by one BTS. The MS distinguishes between cells using the Base Station Identification code (BSIC) that the cell site broadcast over the air.

MOBILE STATION

The MS includes radio equipment and the man machine interface (MMI) that a subscribe needs in order to access the services provided by the GSM PLMN. MS can be installed in Vehicles or can be portable or handheld stations. The MS may include provisions for data communication as well as voice. A mobile transmits and receives message to and from the GSM system over the air interface to establish and continue connections through the system .

            Different type of MSs can provide different type of data interfaces. To provide a common model for describing these different MS configuration, ”reference configuration” for MS, similar to those defined for ISDN land stations, has been defined.

            Each MS is identified by an IMEI that is permanently stored in the mobile unit. Upon request, the MS sends this number over the signaling channel to the MSC. The IMEI can be used to identify mobile units that are reported stolen or operating incorrectly.

            Just as the IMEI identities the mobile equipment, other numbers are used to identity the mobile subscriber. Different subscriber identities are used in different phases of call setup. The Mobile Subscriber ISDN Number (MSISDN) is the number that the calling party dials in order to reach the subscriber. It is used by the land network to route calls toward an appropriate MSC. The international mobile subscribe identity (IMSI) is the primary function of the subscriber within the mobile network and is permanently assigned to him. The GSM system can also assign a Temporary Mobile Subscriber Identity (TMSI) to identity a mobile. This number can be periodically changed by the system and protect the subscriber from being identified by those attempting to monitor the radio channel.

Functions of MS

      The primary functions of MS are to transmit and receive voice and data over the air interface of the GSM system. MS performs the signal processing function of digitizing, encoding, error protecting, encrypting, and modulating the transmitted signals. It also performs the inverse functions on the received signals from the BS.

In order to transmit voice and data signals, the mobile must be in synchronization with the system so that the messages are the transmitted and received by the mobile at the correct instant. To achieve this, the MS automatically tunes and synchronizes to the frequency and TDMA timeslot specified by the BSC. This message is received over a dedicated timeslot several times within a multiframe period of 51 frames. We shall discuss the details of this in the next chapter. The exact synchronization will also include adjusting the timing advance to compensate for varying distance of the mobile from the BTS.

      The MS monitors the power level and signal quality, determined by the BER for known receiver bit sequences (synchronization sequence), from both its current BTS and up to six surrounding BTSs. This data is received on the downlink broadcast control channel. The MS determines and send to the current BTS a list of the six best-received BTS signals. The measurement results from MS on downlink quality and surrounding BTS signal levels are sent to BSC and processed within the BSC. The system then uses this list for best cell handover decisions.

      MS keeps the GSM network informed of its location during both national and international roaming, even when it is inactive. This enables the System to page in its present LA.

      The MS includes an equalizer that compensates for multi-path distortion on the received signal. This reduces inter-symbol interface that would otherwise degrade the BER.

      Finally, the MS can store and display short received alphanumeric messages on the liquid crystal display (LCD) that is used to show call dialing and status information. These messages are limited to 160 characters in length.

    Power Levels

These are five different categories of mobile telephone units specified by the European GSM system: 20W, 8W, 5W, 2W, and 0.8W. These correspond to 43-dBm, 39-dBm, 37-dBm, 33-dBm, and 29-dBm power levels. The 20-W and 8-W units (peak power) are either for vehicle-mounted or portable station use.

            The MS power is adjustable in 2-dB steps from its nominal value down to 20mW (13 dBm). This is done automatically under remote control from the BTS, which monitors the received power and adjusts the MS transmitter to the minimum power setting necessary for reliable transmission.

         SIM Card

·            As described in the first chapter, GSM subscribers are provided with a SIM card with its unique identification at the very beginning of the service. By divorcing the subscriber ID from the equipment  ID, the subscriber may never own the GSM mobile equipment set. The subscriber is identified in the system when he inserts the SIM card in the mobile equipment. This provides an enormous amount of flexibility to the subscribers since they can now use any GSM-specified mobile equipment. Thus with a SIM card the idea of “Personalize” the equipment currently in use and the respective information used by the network (location information) needs to be updated. The smart card SIM is portable between Mobile Equipment (ME) units. The user only needs to take his smart card on a trip. He can then rent a ME unit at the destination, even in another country, and insert his own SIM. Any calls he makes will be charged to his home GSM account. Also, the GSM system will be able to reach him at the ME unit he is currently using.

The SIM is a removable SC, the size of a credit card, and contains an integrated circuit chip with a microprocessor, random access memory (RAM), and read only memory (ROM). It is inserted in the MS unit by the subscriber when he or she wants to use the MS to make or receive a call. As stated, a SIM also comes in a modular from that can be mounted in the subscriber’s equipment.

      When a mobile subscriber wants to use the system, he or she mounts their SIM card and provide their Personal Identification Number(PIN), which is compared with a PIN stored within the SIM. If the user enters three incorrect PIN codes, the SIM is disabled. The PIN can also be permanently bypassed by the service provider if requested by the subscriber. Disabling the PIN code simplifies the call setup but reduces the protection of the user’s account in the event of a stolen SIM.

International Mobile Subscriber Identity.

An IMSI is assigned to each authorized GSM user. It consists of a mobile country code (MSC), mobile network code (MNC), and a PLMN unique mobile subscriber identification number (MSIN). The IMSI is not hardware-specific. Instead, it is maintained on a SC by an authorized subscriber and is the only absolute identity that a subscriber has within the GSM system. The IMSI consists of the MCC followed by the NMSI and shall not exceed 15 digits.

Temporary Mobile Subscriber Identity


A TMSI is a MSC-VLR specific alias that is designed to maintain user confidentiality. It is assigned only after successful subscriber authentication. The correlation of a TMSI to an IMSI only occurs during a mobile subscriber’s initial transaction with an MSC (for example, location updating). Under certain condition (such as traffic system disruption and malfunctioning of the system), the MSC can direct individual TMSIs to provide the MSC with their IMSI.

Mobile Station ISDN Number


The MS international number must be dialed after the international prefix in order to obtain a mobile subscriber in another country. The MSISDN numbers is composed of the country code (CC) followed by the National Significant Number (N(S)N), which shall not exceed 15 digits.

The Mobile Station Roaming Number (MSRN)

The MSRN is allocated on temporary basis when the MS roams into another numbering area. The MSRN number is used by the HLR for rerouting calls to the MS. It is assigned upon demand by the HLR on a per-call basis. The MSRN for PSTN/ISDN routing shall have the same structure as international ISDN numbers in the area in which the MSRN is allocated. The HLR knows in what MSC/VLR service area the subscriber is located. At the reception of the MSRN, HLR sends it to the GMSC, which can now route the call to the MSC/VLR exchange where the called subscriber is currently registered.

International Mobile Equipment Identity


The IMEI is the unique identity of the equipment used by a subscriber by each PLMN and is used to determine authorized (white), unauthorized (black), and malfunctioning (gray) GSM hardware. In conjunction with the IMSI, it is used to ensure that only authorized usera are granted access to the system. An IMEI is never sent in cipher mode by MS.

BASE STATION SYSTEM


The BSS is a set of BS equipment (such as transceivers and controllers) that is in view by the MSC through a single A interface as being the entity responsible for communicating with MSs in a certain area. The radio equipment of a BSS may be composed of one or more cells. A BSS may consist of one or more BS. The interface between BSC and BTS is designed as an A-bis interface. The BSS includes two types of machines: the BTS in contact with the MSs through the radio interface and the BSC, the latter being in contact with the MSC. The function split is basically between transmission equipment, the BTS, and managing equipment at the BSC. A BTS compares radio transmission and reception devices, up to and including the antennas, and also all the signal processing specific to the radio interface. A single transceiver within BTS supports eight basic radio channels of the same TDM frame. A BSC is a network component in the PLMN that function for control of one or more BTS. It is a functional entity that handles common control functions within a BTS.

            A BTS is a network component that serves one cell and is controlled by a BSC. BTS is typically able to handle three to five radio carries, carrying between 24 and 40 simultaneous communication. Reducing the BTS volume is important to keeping down the cost of the cell sites.

            An important component of the BSS that is considered in the GSM architecture as a part of the BTS is the Transcoder/Rate Adapter Unit (TRAU). The TRAU is the equipment in which coding and decoding is carried out as well as rate adoption in case of data. Although the specifications consider the TRAU as a subpart of the BTS, it can be sited away from the BTS (at MSC), and even between the BSC and the MSC.

            The interface between the MSC and the BSS is a standardized SS7 interface (A-interface) that, as stated before, is fully defined in the GSM recommendations. This allows the system operator to purchase switching equipment from one supplier and radio equipment and the controller from another. The interface between the BSC and a remote BTS likewise is a standard the A-bis. In splitting the BSS functions between BTS and BSC, the main principle was that only such functions that had to reside close to the radio transmitters/receivers should be placed in BTS. This will also help reduce the complexity of the BTS.
           
         Functions of BTS

·          As stated, the primary responsibility of the BTS is to transmit and receive radio signals from a mobile unit over an air interface. To perform this function completely, the signals are encoded, encrypted, multiplexed, modulated, and then fed to the antenna system at the cell site. Trans-coding to bring 13-kbps speech to a standard data rate of 16 kbps and then combining four of these signals to 64 kbps is essentially a part of BTS, though, it can be done at BSC or at MSC. The voice communication can be either at a full or half rate over logical speech channel. In order to keep the mobile synchronized, BTS transmits frequency and time synchronization signals over frequency correction channel (FCCH and BCCH logical channels. The received signal from the mobile is decoded, decrypted, and equalized for channel impairments.

Random access detection is made by BTS, which then sends the message to BSC. The channel subsequent assignment is made by BSC. Timing advance is determined by BTS. BTS signals the mobile for proper timing adjustment. Uplink radio channel measurement corresponding to the downlink measurements made by MS has to be made by BTS.

BTS-BSC Configurations


There are several BTS-BSC configurations: single site; single cell; single site; multicell; and multisite, multicell. These configurations are chosen based on the rular or urban application. These configurations make the GSM system economical since the operation has options to adapt the best layout based on the traffic requirement. Thus, in some sense, system optimization is possible by the proper choice of the configuration. These include omni directional rural configuration where the BSC and BTS are on the same site; chain and multidrop loop configuration in which several BTSs are controlled by a single remote BSC with a chain or ring connection topology; rural star configuration in which several BTSs are connected by individual lines to the same BSC; and sectorized urban configuration in which three BTSs share the same site amd are controlled by either a collocated or remote BSC.

            In rural areas, most BSs are installed to provide maximum coverage rather then maximum capacity.

  Transcoder

Depending on the relative costs of a transmission plant for a particular cellular operator, there may be some benefit, for larger cells and certain network topologies, in having the transcoder either at the BTS, BSC or MSC location. If the trascoder is located at MSC, they are still considered functionally a part of the BSS. This approach allows for the maximum of flexibility and innovation in optimizing the transmission between MSC and BTS.
            The transcoder is the device that takes 13-Kbps speech or 3.6/6/12-Kbps data multiplexes and four of them to convert into standard 64-Kbps data. First, the 13 Kbps or the data at 3.6/6/12 Kbps are brought up to the level of 16 Kpbs by inserting additional synchronizing data to make up the difference between a 13-Kbps speech or lower rate data, and then four of them are combined in the transcoder to provide 64 Kpbs channel within the BSS. Four traffic channel can then be multiplexed on one 64-Kpbs circuit. Thus, the TRAU output data rate is 64 Kpbs. Then, up to 30 such 64-Kpbs channels are multiplexed onto a 2.048 Mpbs if a CEPT1 channel is provided on the A-bis interface. This channel can carry up to 120-(16x 120) traffic and control signals. Since the data rate to the PSTN is normally at 2 Mbps, which is the result of combining 30-Kbps by 64-Kbph channels, or 120- Kbps by 16-Kpbs channels.




   BSC


The BSC, as discussed, is connected to the MSC on one side and to the BTS on the other. The BSC performs the Radio Resource (RR) management for the cells under its control. It assigns and release frequencies and timeslots for all MSs in its own area. The BSC performs the intercell handover for MSs moving between BTS in its control. It also reallocates frequencies to the BTSs in its area to meet locally heavy demands during peak hours or on special events. The BSC controls the power transmission of both BSSs and MSs in its area. The minimum power level for a mobile unit is broadcast over the BCCH. The BSC provides the time and frequency synchronization reference signals broadcast by its BTSs. The BSC also measures the time delay of received MS signals relative to the BTS clock. If the received MS signal is not centered in its assigned timeslot at the BTS, The BSC can direct the BTS to notify the MS to advance the timing such that proper synchronization takes place. The functions of BSC are as follows.

            The BSC may also perform traffic concentration to reduce the number of transmission lines from the BSC to its BTSs, as discussed in the last section.

SWITCHING SUBSYSTEMS: MOBILE SWITCHING CENTER AND GATEWAY SWITCHING CENTER

The network and the switching subsystem together include the main switching functions of GSM as well as the databases needed for subscriber data and mobility management (VLR). The main role of the MSC is to manage the communications between the GSM users and other telecommunication network users. The basic switching function of performed by the MSC, whose main function is to coordinate setting up calls to and from GSM users. The MSC has interface with the BSS on one side (through which MSC VLR is in contact with GSM users) and the external networks on the other (ISDN/PSTN/PSPDN). The main difference between a MSC and an exchange in a fixed network is that the MSC has to take into account the impact of the allocation of RRs and the mobile nature of the subscribers and has to perform, in addition, at least, activities required for the location registration and handover.

                        The MSC is a telephony switch that performs all the switching functions for MSs located in a geographical area as the MSC area. The MSC must also handle different types of numbers and identities related to the same MS and contained in different registers: IMSI, TMSI,ISDN number, and MSRN. In general identities are used in the interface between the MSC and the MS, while numbers are used in the fixed part of the network, such as, for routing.

Functions of MSC


As stated, the main function of the MSC is to coordinate the set up of calls between GSM mobile and PSTN users. Specifically, it performs functions such as paging, resource allocation, location registration, and encryption.

Specifically, the call-handling function of paging is controlled by MSC. MSC coordinates the set up of call to and from all GSM subscribers operating in its areas. The dynamics allocation of access resources is done in coordination with the BSS. More specifically, the MSC decides when and which types of channels should be assigned to which MS. The channel identity and related radio parameters are the responsibility of the BSS, The MSC provides the control of interworking with different networks. It is transparent for the subscriber authentication procedure. The MSC supervises the connection transfer between different BSSs for MSs, with an active call, moving from one call to another. This is ensured if the two BSSs are connected to the same MSC but also when they are not . In this latter case the procedure is more complex, since more then one MSC in involved. The MSC performs billing on calls for all subscribers based in its areas. When the subscriber is roaming elsewhere, the MSC obtains data for the call billing from the visited MSC. Encryption parameters transfers from VLR to BSS to facilitate ciphering on the radio interface are done by MSC. The exchange of signaling  information on the various  interface toward the other network elements and the management of the interface themselves are all controlled by the MSC. Finally, the MSC serves as a SMS gateway to forward SMS messages from Short Message Service Centers (SMSC) to the subscribers and from the subscribers to the SMSCs. It thus acts as a message mailbox and delivery system.

 VLR

The VLR is collocated with an MSC. A MS roaming in an MSC area is controlled by the VLR responsible for that area. When a MS appears in a LA, it starts a registration procedure. The MSC for that area notices this registration and transfers to the VLR the identify of the LA where the MS is situated. A VLR may be in charge of one or several MSC LA’s. The VLR constitutes the databases that support the MSC in the storage and retrieval of the data of subscribers present in its area. When an MS enters the MSC area borders, it signals its arrival to the MSC that stores its identify in the VLR. The information necessary to manage the MS is contained in the HLR and is transferred to the VLR so that they can be easily retrieved if so required.

Data Stored in VLR


·         The data contained in the VLR and in the HLR are more or less the same. Nevertheless the data are present in the VLR only as long as the MS is registered in the area related to that VLR. Data associated with the movement of mobile are IMSI, MSISDN, MSRN, and TMSI. The terms permanent and temporary, in this case, are meaningful only during that time interval. Some data are mandatory, others are optional.

HOME LOCATION REGISTER


The HLR is a database that permanently stores data related to a given set of subscribers. The HLR is the reference database for subscriber parameters. Various identification numbers and addresses as well as authentication parameters, services subscribed, and special routing information are stored. Current subscriber status including a subscriber’s temporary roaming number and associated VLR if the mobile is roaming, are maintained.

            The HLR provides data needed to route calls to all MS-SIMs home based in its MSC area, even when they are roaming out of area or in other GSM networks. The HLR provides the current location data needed to support searching for and paging the MS-SIM for incoming calls, wherever the MS-SIM may be. The HLR is responsible for storage and provision of SIM authentication and encryption parameters needed by the MSC where the MS-SIM is operating. It obtains these parameters from the AUC.

            The HLR maintains record of which supplementary service each user has subscribed to and provides permission control in granting services. The HLR stores the identification of SMS gateways that have messages for the subscriber under the SMS until they can be transmitted to the subscriber and receipt is knowledge.
            Some data are mandatory, other data are optional. Both the HLR and the VLR can be implemented in the same equipment in an MSC (collocated). A PLMN may contain one or several HLRs.

AUTHENTICATION CENTER


The AUC stores information that is necessary to protect communication through the air interface against intrusions, to which the mobile is vulnerable. The legitimacy of the subscriber is established through authentication and ciphering, which protects the user information against unwanted disclosure. Authentication information and ciphering keys are stored in a database within the AUC, which protects the user information against unwanted disclosure and access.
            In the authentication procedure, the key Ki is never transmitted to the mobile over the air path, only a random number is sent. In order to gain access to the system, the mobile must provide the correct Signed Response (SRES) in answer to a random number (RAND) generated by AUC.
            Also, Ki and the cipher key Kc are never transmitted across the air interface between the BTS and the MS. Only the random challenge and the calculated response are transmitted. Thus, the value of Ki and Kc are kept secure. The cipher key, on the other hand, is transmitted on the SS7 link between the home HLR/AUC and the visited MSC, which is a point of potential vulnerability. On the other hand, the random number and cipher key is supposed to change with each phone call, so finding them on one call will not benefit using them on the next call.
            The HLR is also responsible for the “authentication” of the subscriber each time he makes or receives a call. The AUC, which actually performs this function, is a separate GSM entity that will often be physically included with the HLR. Being separate, it will use separate processing equipment for the AUC database functions.

 EQUIPMENT IDENTIFY REGISTER


EIR is a database that stores the IMEI numbers for all registered ME units. The IMEI uniquely identifies all registered ME. There is generally one EIR per PLMN. It interfaces to the various HLR in the PLMN. The EIR keeps track of all ME units in the PLMN. It maintains various lists of message. The database stores the ME identification and has nothing do with subscriber who is receiving or originating call. There are three classes of ME that are stored in the database, and each group has different characteristics.


·         White List: contains those IMEIs that are known to have been assigned to valid MS’s. This is the category of genuine equipment.
·         Black List: contains IMEIs of mobiles that have been reported stolen.
·         Gray List: contains IMEIs of mobiles that have problems (for example, faulty software, wrong make of the equipment). This list contains all MEs with faults not important enough for barring.

INTERWORKING FUNCTION


·         GSM provided a wide range of data services to its subscribers. The GSM system interface with the various forms of public and private data networks currently available. It is the job of the IWF to provide this interfacing capability.

The IWF, which in essence is a part of MSC, provides the subscriber with access to data rate and protocol conversion facilities so that data can be transmitted between GSM Data Terminal Equipment (DTE) and a land-line DTE.

  ECHO CANCELER

  EC is used on the PSTN side of the MSC for all voice circuits. The EC is required at the MSC PSTN interface to reduce the effect of GSM delay when the mobile is connected to the PSTN circuit. The total round-trip delay introduced by the GSM system, which is the result of speech encoding, decoding and signal processing, is of the order of 180 ms. Normally this delay would not be an annoying factor to the mobile, except when communicating to PSTN as it requires a two-wire to four-wire hybrid transformer in the circuit. This hybrid is required at the local switching office because the standard local loop is a two-wire circuit. Due to the presence of this hybrid, some of the energy  at its four-wire receive side from the mobile is coupled to the four-wire transmit side and thus retransmitted to the mobile. This causes the echo, which does not effect the land subscriber but is an annoying factor to the mobile. The standard EC cancels about 70 ms of delay.

                        During a normal PSTN (land-to-land call), no echo is apparent because the delay is too short and the land user is unable to distinguish between the echo and the normal telephone “side tones” However, with the GSM round-trip delay added and without the EC, the effect would be irritating to the MS subscriber.

 OPERATION AND MAINTENANCE CENTER

The OMC provides alarm-handling functions to report and log alarms generated by the other network entities. The maintenance personnel at the OMC can define that criticality of the alarm. Maintenance cover both technical and administrative actions to maintain and correct the system operation, or to restore normal operations after a breakdown, in the shortest possible time.

            The fault management functions of the OMC allow network devices to be manually or automatically removed from or restored to service. The status of network devices can be checked, and tests and diagnostics on various devices can be invoked. For example, diagnostics may be initiated remotely by the OMC. A mobile call trace facility can also be invoked. The performance management functions included collecting traffic statistics from the GSM network entities and archiving them in disk files or displaying them for analysis. Because a potential to collect large amounts of data exists, maintenance personal can select which of the detailed statistics to be collected based on personal interests and past experience. As a result of performance analysis, if necessary, an alarm can be set remotely.

            The OMC provides system change control for the software revisions and configuration data bases in the network entities or uploaded to the OMC. The OMC also keeps track of the different software versions running on different subsystem of the GSM.